Digital Pressuremeter Tension Tester,Pressuremeter Wirerope Tension Meter
Digital Pressuremeter tension tester,wirerope tension meter,Pressuremeter wire tension tester
Introduction of Digital Pressuremeter Tension Tester
HD digital pressuremeter tension tester is a kindof special equipment to measure wind towers,
signal transmission and power transmission systems rope tension. It has characters of high precision, easy to operate, easy to carry, etc. also it has many kinds of test modes, convenient to testing.
Users can also input gravity acceleration value to make the test more accurately.
Function Characteristics of Digital Pressuremeter Tension Tester
1: High precision, high resolution.
2: Five kinds of test modes, three kinds display modes---To improve test efficiency to the greatest extent.
3: N (Newton), kg (kg), lb (lb) three testing units for selection, mutual conversion.
4: Gravity acceleration setting function---Users can input the precise gravity acceleration value of testing place, make the testing and unit conversion more accurate.
5: Peak holding function---Maintain peak display until manual reset.
6: Automatic peak function---Maintain peak value can be removed automatically after 2 seconds.
7: Can set upper and lower limit value to make statistical analysis, the value more than comparative value, the alarm buzzer will alarm.
8: Data stored function, we can store 896 test values.
9: 10 minutes without operating automatic shutdown, green initiative.
10: High quality charging power,charge voltage from 240V to 100V, can adapt to domestic and foreign most areas,also have short circuit, leakage, overload protection function.
11: 2 sets of installation dimensions, adapt to domestic and foreign most test machines,convenient to installation and using.
12: Six digit Big screen display.
| Model | HD1T | HD2T | HD5T | HD10T | HD20T |
| Max load value | 10KN | 20KN | 50KN | 100KN | 200KN |
| Load division value | 0.01KN | 0.01KN | 0.01KN | 0.1KN | 0.1KN |
| 0.001Mg | 0.001Mg | 0.001Mg | 0.01Mg | 0.01Mg |
| 0.001Klb | 0.001Klb | 0.001Klb | 0.01Klb | 0.01Klb |
| Error of indication | | ±0.5% | | ±1.0% |
| Accuracy | According to the ropes characteristics of different forms, precision is the 2%-6% of the full range. |
| Unit | N(KN) Kg(Mg or T) Lb(Klb) |
| Output interface | Rs232 Nine holes socket |
| Power | Rechargeable batteries Battery voltage(100V-240V) |
| Sensor structure | S type or cylinder shape high-accuracy sensor (External) |
| Operating temperature | -20℃+60℃ |
| Transportation temperature | -20℃+60℃ |
| Relative temperature | 10%-90% RH |
| Work environment | No seismic focus and corrosive medium around |
| Net weight | About 400g+weight of sensor |
| Size | 230 * 66 * 36mm |
Packing and Shipping
Company Introduction
Factory Show
Certificate
Our Services
