PXB-286 Molde Negative Ion Meter PH MV Function For Water Testing
Brief introduction of ion meter
The ion meter is an electrochemical analyzer used to measure the ion concentration in a solution. Measurement of H + also belongs to the ion meter, we generally call its PH meter or acidity meter, the general people refer to the ion meter is measured in addition to H + other than the electrochemical electrochemical instruments.
Features of NANBEI ion meter:
1. To support TFT touch screed with colour and navigation bar;
2. To support measurement Ion value:Ag+,Na+,K+,NH4+,CL-,F-,NO3-,BF4-,CN-,CU2+,Pb2+,Ca2+,etc
3. To support concentration unit switch: ug/L,mg/L,g/L,mol/L,mmol/L,PX etc
4. To support identification PH standard buffer;
5. To support storing 2000 measurement value with view function;
6. To meet GLP norm;
7. To support ID management;
8. To support USB and Firmware Upgrade function
9. Long Standby Time
| Model | PXB-286 |
| Parameters | pH/Ion concentration /mV (ORP)/ ℃ |
| Range | pH: 0.00~14.00 mV: ±1800 Ion concentration: (0~19990)mg/L Temp: 0.0~60.0℃ |
| Resolution | pH: 0.01 mV: 1 Temp: 0.1℃ |
| Accuracy | pH: ±0.01±1 bit mV: ±0.1%FS Temp:±0.3℃±1 bit |
| Ion Mode | pH/pX/pF/pCl |
| Temp Compensation | Manual, (0.0~60.0)℃ |
| Calibration | May select 5 standard buffer solution for two-point calibration |
| Data storage | 400 sets of data |
| View, Delete&Print | Yes |
| Interface | — |
| Display | Backlit LCD |
| Housing | IP65 |
| Power | Four AA batteries |
| Dimension&Weight | 210×86×50mm, 0.5kg |
| Standard Configuration | PF-202-CF Fluoride ISE (waterproof); T-818-B-6F ATC Probe (waterproof); JB-1A Stirrer |
