DDBJ-350 Water Analysis Instrument , Water Conductivity Meter Electrical
Brief introduction of conductivity meter
Conductivity Tester is a multi-range instrument that can meet a variety of application testing requirements from deionized water to seawater. This instrument can provide automatic temperature compensation, and can set the temperature coefficient, it can be used to measure the temperature coefficient and water different liquid samples. It can provide three ranges and has a range automatic selection function, can automatically select the most appropriate range when testing.
Features of NANBEI conductivity meter:
1. Special backlit LCD display
2. It can measure conductivity, TDS, salinity and temperature.
3. It functions as automatic temperature compensation and automatic calibration.
4. It provides power failure protection and automatic power-off functions.
5. It has calibration function. The user can calibratesensor coefficient and TDS conversion coefficient.
6. Measuring results can be stored, deleted and viewed. Up to 100 sets of test data can be stored.
7. It has RS-232 port and can be connected with TP-16 printer. If matched with data collecting software, it can be communicated with PC.
8. If matched with the titanium alloy sensor of 0.01cm-1 and sealed measuring reservoir, it can test high purity water.
9. It is equipped with DJS-1C conductancesensor(platinum black) and T-818-B-6 temperaturesensor.
| Model | DDBJ-350 |
| Parameters | Conductivity/TDS/Salinity/℃ |
| Range | Cond | 0.000μS/cm~199.9mS/cm (with 5 switches) |
| TDS | 0.000 mg/L~19.99g/L (with 5 switches) |
| Salinity | (0.00~8.00)% |
| Temp | (0.0~40.0)℃ |
| Accuracy | Cond | ±1.0%(FS) |
| TDS | ±1.0%(FS) |
| Salinity | ±0.2% |
| Temp | ±0.3℃±1 bit |
| Stability | (±0.7%(FS))/3h |
| Temp compensation | Manual/Auto(0.0~40.0)℃ |
| Temp coefficient | 2% |
| Calibration | Calibrate electrode constant or TDS factor |
| Data storage | Each 100 sets of data |
| View, delete&print | Yes |
| Display | Backlit LCD |
| Under-voltage Instruction | Yes |
| Communication Interface | RS-232 |
| Housing | IP65 |
| Power | Four AA batteries |
| Dimension&Weight | 210×86×50mm, 0.5kg |
| Standard Configuration | DJS-1CF Platinum Black Conductivity Electrode T-818-B-6F ATC Probe (Waterproof) |
